LED Technology
DIRECTIONAL LIGHTS
SLIM STEP LIGHTS
WELL LIGHTS
AREA LIGHTS
PATH LIGHTS
HANGING LIGHTS
STEP LIGHTS
SLIM BRICK LIGHTS
RAIL LIGHTS
UNDERWATER LIGHTS
FLEXIBLE BBQ LIGHTS
FLEXIBLE GARDEN LIGHTS
120 VOLT FLOOD LIGHTS
TRANSFORMERS
ACCESSORIES AND PARTS
LAMP GUIDE
PHOTOMETRICS GUIDE
COLOR CHART
LANDSCAPE LIGHTING DESIGN
ESTIMATED SHIPPING WEIGHTS

click to enlarge drawing
click to enlarge image
CL-727-T
   
Click For Printable Specification Sheet
   
HOUSING & 
SHROUDS
Two (2) precision machined aluminum bar. The shroud is locked into place with one stainless steel mini-set screw, shroud is adjustable.
   
STEM

18" machined aluminum pipe with ½” NPT on bottom.  12" stem is also available.
(view stems)
.


   
FINISH: Polyester UV powder coated, available in BK- Black and BZ- Bronze.
   
LENS: Sealed shock resistant tempered glass lens to prevent water intrusion. Glass lens is clear.
   
SOCKET: Top grade fixed ceramic bi-pin socket, with lamp retension clip to securely hold lamp in place.
   
LAMP:

12V, T3 halogen, 20W max.
L-20T3 (20w) standard.

Fixture is compatible with LED, Xenon and halogen lamps. See lamp guide for information.

   
GASKET: High temperature silicone O-rings for water-tight seal. 
   
KNUCKLE: Two (2) machined aluminum knuckles with solid stainless steel philips head screws for adjustability and ½" NPT threaded male hub on bottom. An alternative thumb screw , two (2) hex screws, and two (2) allen wrenches are included for each knuckle.
   
WIRING: Fixture is prewired with a 3ft 18-2 SPT1-W direct burial cord. Wire connector available seperately. Universal wire connector (CX-839) or two (2) silicone-filled wire nuts (CX-854) are availble from Corona Lighting..
   
MOUNTING: Standard injection molded spike with ½" NPT threaded female hub.
   
WARRANTY: Five (5) year warranty on fixture housing to protect against manufacture's defects.

click to enlarge image
click to enlarge drawing
click to enlarge image
Electrical Notes:  
  • Fixture is supplied with two (2) 10W T3 bi-pin lamp.
  • Voltage ranges for fixture are:
    • LED lamps: 8-21V
    • Halogen lamps: 11-12.5V
  • Proper greasing and lubrication threaded parts is suggested for installation. 
  • Remote 12 Volt transformer is required.
  • See transformers and accessories for variety of options and choices.
  • Fixture requires Two lamps